Forklift Training Programs London - If you are looking for a job as a forklift operator, our regulatory-compliant forklift training programs provide exceptional instruction in numerous types and styles of lift trucks, classes on pre-shift check, fuel types and handling of fuels, and safe use of a forklift. Hands-on, practical training helps participants in acquiring basic operational skills. Program content covers current rules governing the operation of forklifts. Our proven forklift programs are intended to offer training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.
How to Handle Loads Safely
Whilst the lift truck is in use, do not raise or lower the forks. Loads should not extend higher than the backrest. This is because of the danger of the load sliding back towards the operator. Inspect for overhead obstructions and ensure there is sufficient clearance before lifting a load. Stay away from overhead power lines. When the load is raised straight up, tilt it back slightly.
The lift truck is less steady if a load is in a raised position. Make certain that no one ever walks under the elevated fork. The operator should not leave the forklift while the load is lifted.
When handling pallets, forks must be level and high enough to go into the pallet and extend all the way beneath the load. The width of the forks should provide even distribution of weight.
Chock the wheels and set the brakes before loading and unloading the truck. The floors must be strong enough to support the combined weight of the load and the forklift. Fixed jacks can be installed to be able to support a semi-trailer that is not attached to a tractor. The height of the entrance door must clear the forklift height by a minimum of 5 cm. Edges of rail cars, ramps and docks should be marked and avoid them.
If there is not proper ventilation into the forklift, do not stay in there for extended periods. The trucks interior should have sufficient lighting and be free of obstructions. Check the forklift cab's flooring for holes. The installation of material that are non-slip on the floor will help prevent slipping. Clear whichever obstructions from docks and dockplates and ensure surfaces are not wet or oily.
Lift trucks must not be utilized to tow or push other forklifts.